Good morning,
This is another project that I had created a few months back as part of my Design Team member with Nagashri arts.
At the beginning of every year, we all make resolutions and goals. Also we have planners and calendars to ensure we are able to write down our goals and targets.
I had always wanted a desk calendar for my crafting table. But at the same time something which would last me for beyond a year. As I knew I would not be able to discard it at the end of the year. Thus this year I decided to make one.
The inspiration for making this has been a lot of calendar blocks made of wood that can decoupaged. There are a lot of patterns in wood bases available on Pinterest as well as Google Images.
But to find wood and have a stand created would have been a time taking process. Suddenly it occurred to me that maybe it can be done with some paper and some chipboard pieces (basically scraps from earlier project)
I decided to give it a try and see how it's turns out...
So here is how I went about creating the blocks
1. I wanted the blocks to be a bit big so that I could have the dates in bold. Each of the blocks requires 6 square pieces. This keeping it at 2.5" by 2.5" I cut out 12 such pieces.
2. Taking a piece of cardstock I stuck the pieces in a formation to get a cube (pic below)
3. Keeping half an inch margin for sticking the paper I cut off the excess. I also cut the corners for a neat fold ( As in the pic below)
4. Now the four pieces in a straight line will be stuck together to create the four sides and the other 2 pieces at the top and the bottom. This my cube is ready.
5. I constructed the stand in a similar fashion with the height being 6 inches and the breath being 5.5". The width is about 3 inches.I have kept the breath at 5.5" as the total space taken by the cube would be around 5" together.
6. After the box was constructed all I needed to do was use a beautiful pattern paper and cover it. I have used the Time collection and have selected a variety of colors as I did not want to stick to a particular color combination. Thus each side of the blocks has a different color and pattern.
7. Each of the blocks was stencilled using a number stencil. The number placement on the blocks is as follows
Block 1 - 0,1,2,3,4,5
Block 2 - 0,1,2,6,7,8
(Number 6 doubles as number 9, so I was careful with paper being selected for that particular side)
8. After my blocks were ready and the stand also covered with pattern paper, I creates some tags for the months and put them on the in the metal label bracket. The other months tags are stored in a pocket at the back of the stand. This ensures that I can easily take out and change the month as and when required.
9. Lastly on the sides I added some handmade sunflowers to add a bit more beauty and colour to the project. I have used archival inks for colouring the flowers. I did not want to add any space for notes etc as I wanted this to be just a calender stand. (though a area for post it notes or pockets can also be done on the sides)
I did initially plan to add another tag on the top for the year but then decided to do away with it... That is an option if you wish to make this.
There are a few pics of the completed project. (front and back)
Hope you enjoyed this project
Wishing you a wonderful day ahead
This is another project that I had created a few months back as part of my Design Team member with Nagashri arts.
At the beginning of every year, we all make resolutions and goals. Also we have planners and calendars to ensure we are able to write down our goals and targets.
I had always wanted a desk calendar for my crafting table. But at the same time something which would last me for beyond a year. As I knew I would not be able to discard it at the end of the year. Thus this year I decided to make one.
The inspiration for making this has been a lot of calendar blocks made of wood that can decoupaged. There are a lot of patterns in wood bases available on Pinterest as well as Google Images.
But to find wood and have a stand created would have been a time taking process. Suddenly it occurred to me that maybe it can be done with some paper and some chipboard pieces (basically scraps from earlier project)
I decided to give it a try and see how it's turns out...
So here is how I went about creating the blocks
1. I wanted the blocks to be a bit big so that I could have the dates in bold. Each of the blocks requires 6 square pieces. This keeping it at 2.5" by 2.5" I cut out 12 such pieces.
2. Taking a piece of cardstock I stuck the pieces in a formation to get a cube (pic below)
3. Keeping half an inch margin for sticking the paper I cut off the excess. I also cut the corners for a neat fold ( As in the pic below)
4. Now the four pieces in a straight line will be stuck together to create the four sides and the other 2 pieces at the top and the bottom. This my cube is ready.
5. I constructed the stand in a similar fashion with the height being 6 inches and the breath being 5.5". The width is about 3 inches.I have kept the breath at 5.5" as the total space taken by the cube would be around 5" together.
6. After the box was constructed all I needed to do was use a beautiful pattern paper and cover it. I have used the Time collection and have selected a variety of colors as I did not want to stick to a particular color combination. Thus each side of the blocks has a different color and pattern.
7. Each of the blocks was stencilled using a number stencil. The number placement on the blocks is as follows
Block 1 - 0,1,2,3,4,5
Block 2 - 0,1,2,6,7,8
(Number 6 doubles as number 9, so I was careful with paper being selected for that particular side)
8. After my blocks were ready and the stand also covered with pattern paper, I creates some tags for the months and put them on the in the metal label bracket. The other months tags are stored in a pocket at the back of the stand. This ensures that I can easily take out and change the month as and when required.
9. Lastly on the sides I added some handmade sunflowers to add a bit more beauty and colour to the project. I have used archival inks for colouring the flowers. I did not want to add any space for notes etc as I wanted this to be just a calender stand. (though a area for post it notes or pockets can also be done on the sides)
I did initially plan to add another tag on the top for the year but then decided to do away with it... That is an option if you wish to make this.
There are a few pics of the completed project. (front and back)
Hope you enjoyed this project
Wishing you a wonderful day ahead
No comments:
Post a Comment